SERIAL 2 ETHERNET
MDL-S2E
Serial-to-Ethernet (S2E) Module
S2E module accelerates the product development by providing ready-to-runhardware and comprehensive documentation. The compact design is based on the TEXAS microcontroller, a highly integrated ARM® CortexTM –M3 microcontroller with integrated 10/100 Ethernet MAC and PHY, 50-MHz performance, and ample single cycle onchip Flash and SRAM memory for efficient network traffic handling.The S2E module includes one 10/100 Ethernet port, two serial ports and 10-bit,3-channel ADC with flexibility that includes both RS-232 and CMOS/TTL level signalling, flowcontrol, and hardware support for both synchronous and asynchronous serial communication.The most common application for the S2E module is for augmenting legacy products thatcontain a serial port for a configuration or control interface. Simply installing a S2E module into the legacy serial device provides instant networking capability with no major board redesign or software changes, a tiny form-factor for unobtrusive implementation, and cablelengths much longer than what is available for simple serial connections.
Features
The S2E module provides the following features
- 10/100 Mbit Ethernet port
- Auto MDI/MDIX.
- Traffic and link indicators.
- Two serial ports, configured as data communication equipment (DCE), include
- RTS/CTS for flow control
- PORT0 has RS-232 levels, transceiver runs at up to 250 Kbits/sec
- PORT1 has CMOS/TTL levels, can run at 1.5 Mbits/sec
- Both serial ports are independent and may be used simultaneously.
- Module software
