IR REMOTE CONTROL FAN & LIGHTS
PRODUCT CATALOUGE -8bit

1. Overview
IR Remote control is a combination of infrared transmitter and infrared receiver contains 4 relays and 1 Fan with Speed Control Thru TRiAC which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems.
the remote control operate the corresponding relay on the receiver board, i.e. Light 1 operates relay 1, Light 2 operates relay 2, etc. Relay contact can control any equipment in momentary mode (On till key pressed) or Latch Mode (Toggle on each key press). Each relay has indicator LED showing current status.

The transmitter uses a modulated 40 kHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the receiver end the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via ULN2803 which is an octal transistor array.

Special Feauture - Memory backup - Memory bacup Saves Last Conditon of Rlys if Power has Gone with FAN Speed also
Custom Build Remote Control with Sleek match

2. Features

Transmitter operating range up to 10 Mts visible distance
Compact 3V Battery Operated Transmitter
Receiver Indicates output status by LED
Receiver operates from 12V AC or DC power supply
Relay contact are brought out as Screw Terminals

3. Applications
- Burglar alarm system
- Smoke and fire alarm system
- Garage door controllers
- Car door controllers
- Car alarm system
- Security system
- Cordless telephones
- Other remote control systems

4. Specification

4.1. Transmitter

Operating Voltage 3.0V DC Battery
Idle Operating Current <0.1 mA @3.0VDC
Active Operating Current on Key Pressed 4 mA
@3.0V DC
Infrared Carrier Frequency / Duty Cycle +/- 2%
40 kHz / 50%
Range of Operation Approx. 10 Mts

4.2. Receiver

Operating Voltage 12.0V DC Adapter
Operating Current (All Relays Off) 15 mA @5.0VDC
Operating Current (All Relays On) 250.0 mA @5.0V DC
Infrared Detector Frequency 40 kHz / 50%